SC600BIMSTRT Overview

Its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package is used to save board space. This LED driver has 1 outputs.It is possible to mount the led driver using Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.The LED driver has the capability of operating at a temperature of -40°C~150°C TJ.Backlight has significant advantages.The system operates on the basis of the frequency 650kHz.It operates with 10 terminations.There are 10 pins used to form the base of its configuration.It is inevitable that there will be undetermined failures when the supply voltage is less than 2.5V.It has been mounted on Surface Mount.It is under the base part number SC600 that you can find this LED driver.It is acceptable to operate with a supply voltage of 6.5V.There is 5V voltage output from it.10 pins are used on the device.Further, it can be classified as Power Management Circuits based on its characteristics.It is possible to supply the load with 120mA current.A component of the mAhXLife? series, this LED driver is widely used in a variety of applications.Operation of the device requires 3.7V volts to be applied to the circuit.It works well when the input voltage is higher than 2.5V.

SC600BIMSTRT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~150°C TJ
Frequency of 650kHz

SC600BIMSTRT Applications

There are a lot of Semtech Corporation SC600BIMSTRT LED Driver ICs applications.

• OLED power supply for portable equipment
• Stage Lighting and Signage
• A- lamps
• Dimmable LED for vehicle interiors
• Other Electronic Devices
• White LED Backlight for portable equipment
• LED headlights
• Amusement Machines
• LED Lightings for Industrial Equipment
• Panel lighting