A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. This clock generator is embedded in the 48-TFSOP (0.240, 6.10mm Width) package. When reflowed, this frequency generator can withstand a maximum temperature of NOT SPECIFIED. 48 terminations can be found in frequency synthesizer. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. To access the full performance of the electronic component, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 170MHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 2.625V of power. A maximum voltage of 2.375V should be used for this frequency generator for safety reasons. This clock PLL works with a supply voltage of 2.375V~3.465V. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. In this case, we are dealing with a frequency synthesizer that can be used with SSTL-2 logic levels. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. This part number is related to its related electronic parts. There are a number of 48 pins that are available on the clock generators. Supply voltage 2.5V is what time clock generator can handle. 11 signal outputs enable clock PLL to magnify output frequency as high as possible.
CY2SSTV850ZCT Features
Available in the 48-TFSOP (0.240, 6.10mm Width) Supply voltage of 2.5V Operating supply voltage of 2.5V
CY2SSTV850ZCT Applications
There are a lot of Silicon Labs CY2SSTV850ZCT Clock Generators applications.