As a clock IC, it is packaged by the Tape & Reel (TR) method. The 24-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 24 terminations. Basically, this time clock generator needs a voltage of 3V. There is a Clock PLL called Crystal which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 1.8GHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. A maximum voltage of 2.7V should be used for this frequency generator for safety reasons. There should be 2.7V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Frequency Synthesizer component. Microprocessor-specific clock PLL with 24 bits. The related electronic parts of part number SI4133 are listed below. There are 24 pins that are available on the clock PLL. I have designed a clock PLL with 3 elements and low jitter performance.
SI4133-D-GTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Supply voltage of 3V
SI4133-D-GTR Applications
There are a lot of Silicon Labs SI4133-D-GTR Clock Generators applications.