SI53320-B-GT Overview

It is available in the case 20-TSSOP (0.173, 4.40mm Width) for this cut smart buffer. There is a Tube packaged with it. It has 20 terminations in it, which means that it is terminated. Supply voltages of 2.5V enable high efficiency. A mount of Surface Mount has been applied to it. This electronic part is classified as Fanout Buffer (Distribution), Multiplexer. When the temperature is set to -40°C~85°C, reliable performance is ensured. It should be capable of operating with a power supply of 1.71V~3.63V volts. The clock buffer contains 20 pins. There is LVPECL output from clock driver. Operation is performed with 20 pins. It belongs to the family of SI53320. In this case, Vsup will be set to 2.63V (decimal). As a rule, the supply voltage (Vsup) should be kept above 2.38V for normal operation. As a default, it is set to output 5 by default. As long as the frequency is 725MHz, excellent accuracy can be achieved.

SI53320-B-GT Features

20 terminations
The operating temperature of -40°C~85°C degrees
at 725MHz frequency

SI53320-B-GT Applications

There are a lot of Silicon Labs SI53320-B-GT Clock Buffers & Drivers applications.

• Telecommunications
• Industrial automation control system
• Consumer Electronics
• Other PCIe Gen2 networking applications
• Big data
• Clock signal format conversion
• Oscilloscope and logic analyzer front ends
• Internet of Things
• High performance communication system
• High speed line receiver