SI5335A-B06819-GMR Overview

Clock ICs are packaged using the Tape & Reel (TR) method. Clock PLL is embedded in the 24-VFQFN Exposed Pad package. This clock generator will sustain a maximum temperature of 260 when reflown. 24 terminations can be found in frequency synthesizer. A voltage of 1.8V should be applied to this electronic frequency generator. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock generators can take up to 1.98V of power as a maximum supply voltageThe number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. With this clock-generating device, a high-quality clock output frequency of 350MHz can be produced. If the ambient temperature is below -40°C, the clock PLL may not start up. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.

SI5335A-B06819-GMR Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335A-B06819-GMR Applications

There are a lot of Silicon Labs SI5335A-B06819-GMR Clock Generators applications.

• Wide area power system
• Signal generator
• Remote telemetry and instrumentation
• HDD recorders
• Simple clock clean-up circuits
• Televisions
• Infotainment systems
• Motor speed controls
• Cell phones
• Time to digital converters