SI5335A-B07390-GM Overview

As a clock IC, PLLs is packaged using the Tray method. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 24 terminations to be found. Basically, this time clock generator needs a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. With this clock-generating device, a high-quality clock output frequency of 350MHz can be produced. If the ambient temperature is below -40°C, the clock PLL may not start up. A frequency synthesizer with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY features better clock signal output.

SI5335A-B07390-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335A-B07390-GM Applications

There are a lot of Silicon Labs SI5335A-B07390-GM Clock Generators applications.

• Laptops
• Peripheral devices
• Coherent detection of the signal
• Aerospace and defense
• VSAT (Small Ground Satellite Station)
• Satellite navigation communication
• Digital circuits
• Local oscillators (LOs)
• Sampling clocks for ADC and DAC
• HDD recorders