SI5335A-B08951-GM Overview

Tray-method packaging is used for clock ICs. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. This clock generator ic can sustain 260 degrees of temperature during reflowing. 24 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 1.8V. Surface Mount-slots make it easy to mount this electronic component on panels. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. A frequency generator that runs over 85°C may cause ha85°Cards. In this clock-generating clock generator ic, a frequency of 350MHz is synthesi350MHzed for high-quality output. A clock PLL that starts up at a lower temperature may not function. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.

SI5335A-B08951-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335A-B08951-GM Applications

There are a lot of Silicon Labs SI5335A-B08951-GM Clock Generators applications.

• FSK demodulators
• DVD add-on cards for multimedia PCs
• Carrier synchronization in wired communication
• Clock recovery
• Antenna automatic tracking
• Pagers
• Walkie-talkies
• Radio receivers
• Closed circuit systems
• Automatic test equipment