SI5335A-B09130-GM Overview

Tray-method packaging is used for clock ICs. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains a total of 24 terminations within RF synthesizer. A voltage of 1.8V should be applied to this electronic frequency generator. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. Whenever the frequency generators's operating temperature exceeds 85°C, ha85°Cards may occur. For the clock, clock generator's output frequency should not exceed 350MHz. A clock PLL that starts up at a lower temperature may not function. There is a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature on this frequency generator in order to produce a better clock signal.

SI5335A-B09130-GM Features

Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335A-B09130-GM Applications

There are a lot of Silicon Labs SI5335A-B09130-GM Clock Generators applications.

• Local oscillator source in receiver
• Clock synchronization
• Wireless base station for LTE, LTE-advanced
• FSK demodulators
• Clock generation systems
• Broadcast communication
• Pagers
• Automatic control system test
• Mixed mode (analog and digital) applications
• Phase modulation cellular systems