SI5335D-B02509-GM Overview

The Tray method is used for packaging clock ICs. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 24 terminations can be found in frequency generators. Basically, this time clock generator needs a voltage of 1.8V. It would take a maximum supply voltage of 1.98V to operate this time clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. The clock PLL can synthesi200MHze a clock frequency of 200MHz with high quality. If the ambient temperature is below -40°C, the frequency generator may not start. ALSO OPERATES WITH 2.5V AND 3.3V NOMINAL SUPPLY can also be founded when using frequency generators.

SI5335D-B02509-GM Features

Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335D-B02509-GM Applications

There are a lot of Silicon Labs SI5335D-B02509-GM Clock Generators applications.

• Radiotelephones
• Satellite receivers
• Various decoding circuits
• Motor speed controls
• CB radios
• Cable television converter boxes
• Cellular/4G
• Televisions
• Frequency Modulation (FM) stereo decoders
• Automatic test equipment