SI5335D-B05149-GM Overview

Clock generator is packaged in the way of Tray. This clock generator is embedded in the 24-VFQFN Exposed Pad package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result of this, we can find 24 terminations. The clock generator ic should be grounded with a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. The operating temperature should be kept above -40°C. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.

SI5335D-B05149-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335D-B05149-GM Applications

There are a lot of Silicon Labs SI5335D-B05149-GM Clock Generators applications.

• Bit synchronization
• Microwave radio
• GPS systems
• Cable television converter boxes
• Frequency synthesis
• Microprocessor clock multipliers
• Frequency Modulation (FM) stereo decoders
• Digital circuits
• Clock generation systems
• Automatic control system test