SI5341A-D08006-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result, frequency synthesizers can be found to contain 64 terminations. The clock generator ic should be grounded with a voltage of 1.8V. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. There should be a voltage supply above 1.71V for this frequency generator in order to ensure its safety. Whenever the frequency generators's operating temperature exceeds 85°C, ha85°Cards may occur. With this clock-generator, you can generate a high-quality clock output frequency of 1028MHz. In temperatures lower than -40°C, this frequency generator may not start.

SI5341A-D08006-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 1028MHz

SI5341A-D08006-GMR Applications

There are a lot of Silicon Labs SI5341A-D08006-GMR Clock Generators applications.

• Broadcast communication
• Notebooks
• Automatic control system test
• VSAT (Small Ground Satellite Station)
• High-speed optical transport network (OTN)
• Signal modulation and demodulation
• Phase modulation cellular systems
• Line cards used in telephone exchange
• Pulsed digital systems
• FSK demodulators