SI5341B-D06389-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. In it, there are 64 terminations to be found. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. With this clock-generating device, 350MHz of high-quality clock output frequency can be generated. This frequency generator may fail to start up if the ambient temp is lower than -40°C.

SI5341B-D06389-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5341B-D06389-GMR Applications

There are a lot of Silicon Labs SI5341B-D06389-GMR Clock Generators applications.

• Local oscillator source in receiver
• Telecommunication systems
• Quenching?
• Vector network analyzers (VNA)
• 10 Gigabit Ethernet
• Myriad digital applications
• Signal modulation and demodulation
• Fiber Channel
• Aerospace and defense
• Melting