SI5341B-D06418-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. There are 64 terminations found in the file. For this clock generator ic, a voltage of 1.8V is required. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. A frequency generator that runs over 85°C may cause ha85°Cards. For the clock, clock generator's output frequency should not exceed 350MHz. In temperatures lower than -40°C, this frequency generator may not start.

SI5341B-D06418-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5341B-D06418-GMR Applications

There are a lot of Silicon Labs SI5341B-D06418-GMR Clock Generators applications.

• Wireless infrastructure
• 10 Gigabit Ethernet
• Communication infrastructure
• Myriad digital applications
• Clock generation systems
• Radio receivers
• Bit synchronization
• Clock signals to the high-speed Digital RF circuits
• Signal analyzer
• Sampling clocks for ADC and DAC