SI5341B-D08491-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator will sustain a maximum temperature of 260 when reflown. It contains 64 terminations that can be found in frequency synthesizer. To operate this time clock generator, 1.8V voltage should be applied. Clock PLL is capable of receiving a maximum of 1.89V as a supply voltage. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. For the clock, clock generator's output frequency should not exceed 350MHz. This frequency generator may fail to start up if the ambient temp is lower than -40°C.

SI5341B-D08491-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5341B-D08491-GMR Applications

There are a lot of Silicon Labs SI5341B-D08491-GMR Clock Generators applications.

• Medical equipment
• Local oscillator source in receiver
• Closed circuit systems
• Clock generation systems
• Skew suppression
• GPS systems
• Aerospace and defense
• Automatic test equipment
• Frequency Modulation (FM) stereo decoders
• Bit synchronization