SI5342H-D-GM Overview

This clock IC is packaged using the Tray method. This clock generator is embedded in the 44-VFQFN Exposed Pad package. As a result, frequency synthesizers can be found to contain 44 terminations. Clock generator ics require a voltage of 1.8V. The Surface Mount allows this electrical component to be easily installed on the panel. This clock generator would require a maximum supply voltage of 1.89V. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. A frequency generator that runs over 85°C may cause ha85°Cards. For the clock, clock generator's output frequency should not exceed 2750MHz. In temperatures lower than -40°C, this frequency generator may not start. For better clock signal output, this clock PLL is featured with ALSO REQUIRES 3.3V SUPPLY.

SI5342H-D-GM Features

Available in the 44-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 2750MHz

SI5342H-D-GM Applications

There are a lot of Silicon Labs SI5342H-D-GM Clock Generators applications.

• Motor speed controls
• Pulsed digital systems
• VSAT (Small Ground Satellite Station)
• Simple clock clean-up circuits
• Electronic equipment
• Satellite receivers
• Bluetooth transmitters
• Navigation, positioning and surveillance system for aircraft, ships and ships
• Sampling clocks for ADC and DAC
• Wireless handsets