SI5344D-B05345-GMR

Name	Value
Type	Parameter
Surface Mount	YES
Packaging	Tape & Reel (TR)
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	44
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Supply Voltage	1.8V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	30
JESD-30 Code	S-XQCC-N44
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Supply Voltage-Max (Vsup)	1.89V
Temperature Grade	INDUSTRIAL
Supply Voltage-Min (Vsup)	1.71V
uPs/uCs/Peripheral ICs Type	CLOCK GENERATOR, PROCESSOR SPECIFIC
Primary Clock/Crystal Frequency-Nom	750MHz
Output Clock Frequency-Max	350MHz
Height Seated (Max)	0.9mm
Length	7mm
Width	7mm
RoHS Status	ROHS3 Compliant

Name

Value

Type

Parameter

Surface Mount

YES

Packaging

Tape & Reel (TR)

Part Status

Not For New Designs

Moisture Sensitivity Level (MSL)

2 (1 Year)

Number of Terminations

Technology

CMOS

Terminal Position

QUAD

Terminal Form

NO LEAD

Peak Reflow Temperature (Cel)

260

Supply Voltage

1.8V

Terminal Pitch

0.5mm

[email protected] Reflow Temperature-Max (s)

JESD-30 Code

S-XQCC-N44

Operating Temperature (Max)

85°C

Operating Temperature (Min)

-40°C

Supply Voltage-Max (Vsup)

1.89V

Temperature Grade

INDUSTRIAL

Supply Voltage-Min (Vsup)

1.71V

uPs/uCs/Peripheral ICs Type

CLOCK GENERATOR, PROCESSOR SPECIFIC

Primary Clock/Crystal Frequency-Nom

750MHz

Output Clock Frequency-Max

350MHz

Height Seated (Max)

0.9mm

Length

7mm

Width

7mm

RoHS Status

ROHS3 Compliant

SI5344D-B05345-GMR Overview

Tape & Reel (TR)-method packaging is used for clock ICs. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains 44 terminations that can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 1.8V. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. The supply voltage for this frequency synthesizer should be kept above 1.71V for safety considerations. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. Synthesi350MHzing a clock output frequency of 350MHz is possible with this clock-generator. A temperature of less than -40°C may cause this clock PLL to fail to start.

SI5344D-B05345-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5344D-B05345-GMR Applications

There are a lot of Silicon Labs SI5344D-B05345-GMR Clock Generators applications.

Mixed mode (analog and digital) applications
Coherent detection of the signal
Signal generator
VSAT (Small Ground Satellite Station)
Notebooks
High-speed optical transport network (OTN)
Multiplexing communication
Time to digital converters
Integrated phase noise in aerospace systems
FMCW Radar