SI5345B-D08391-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator will sustain a maximum temperature of 260 when reflown. 64 terminations can be found in frequency generators. Basically, this time clock generator needs a voltage of 1.8V. It would take a maximum supply voltage of 1.89V to operate this time clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. With this clock-generating device, a high-quality clock output frequency of 350MHz can be produced. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C.

SI5345B-D08391-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5345B-D08391-GMR Applications

There are a lot of Silicon Labs SI5345B-D08391-GMR Clock Generators applications.

• CPUs
• Signal generator
• High-speed communication applications
• Digital HDTV systems
• FMCW Radar
• Simple clock clean-up circuits
• HDD recorders
• Jitter reduction
• Symbol synchronization
• Coherent carrier tracking