SI5346A-D-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. As a result, frequency synthesizers can be found to contain 44 terminations. Basically, this time clock generator needs a voltage of 1.8V. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. With this clock-generating device, 712.5MHz of high-quality clock output frequency can be generated. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. ALSO REQUIRES 3.3V SUPPLY can also be founded when using frequency generators.

SI5346A-D-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 712.5MHz

SI5346A-D-GMR Applications

There are a lot of Silicon Labs SI5346A-D-GMR Clock Generators applications.

• Multi-function printers
• Bit synchronization
• Signal generator
• Small signal recovery
• Peripheral devices
• Digital circuits
• Microprocessor clock multipliers
• Multiplexing communication
• Integrated phase noise in aerospace systems
• Carrier synchronization in wired communication