SI5350A-B03183-GT Overview

It is packaged using the Tube method since it is a clock IC. A Clock PLL is included with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are a total of 10 terminations in this file. This time clock generator should be voltaged at 1.8V. The Surface Mount allows this electrical component to be easily installed on the panel. The maximal supply voltage (Vsup) reaches 1.89V. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. A temperature of less than -40°C may cause this clock PLL to fail to start. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5350A-B03183-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B03183-GT Applications

There are a lot of Silicon Labs SI5350A-B03183-GT Clock Generators applications.

• Remote telemetry and instrumentation
• Fiber Channel
• Frequency synthesis
• Automatic control system test
• Radar
• Local oscillators (LOs)
• High-frequency induction heating
• Satellite navigation communication
• Vector network analyzers (VNA)
• Clock recovery