SI5350A-B03204-GTR Overview

As a clock IC, it is packaged by the Tape & Reel (TR) method. This clock generator is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. It contains 10 terminations that can be found in frequency synthesizer. For this clock generator ic, a voltage of 1.8V is required. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 1.89V of power. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. The supply voltage (Vsup) should be kept above 1.71V for normal operation. The operating temperature should be kept below 85°C. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. If the ambient temperature is below -40°C, the frequency generator may not start. The frequency generator has a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature to improve the output of clock signals.

SI5350A-B03204-GTR Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B03204-GTR Applications

There are a lot of Silicon Labs SI5350A-B03204-GTR Clock Generators applications.

• Bit synchronization
• Ports
• Computers to manage memory cards
• Simple clock clean-up circuits
• Antenna automatic tracking
• Carrier synchronization in wired communication
• Automatic test equipment
• Bluetooth receivers
• CB radios
• DVD recorders