SI5350A-B04108-GT Overview

As a clock IC, PLLs is packaged using the Tube method. This clock generator is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. 10 terminations can be found in frequency synthesizer. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 1.89V. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. The supply voltage for this frequency synthesizer should be kept above 1.71V for safety considerations. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. This clock-generating clock generator ic is able to synthesi200MHze high-quality clock output frequency of 200MHz. This frequency generator may fail to start up if the ambient temp is lower than -40°C. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5350A-B04108-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04108-GT Applications

There are a lot of Silicon Labs
SI5350A-B04108-GT Clock Generators applications.

• Instrument
• Automatic test equipment
• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks