SI5350A-B04466-GT Overview

It is packaged using the Tube method since it is a clock IC. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. 10 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 1.8V is required. PLL clock is mounted in the way of Surface Mount. Clock generators can take up to 1.89V of power as a maximum supply voltageThe digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. This clock-generating clock generator ic is able to synthesi200MHze high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.

SI5350A-B04466-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04466-GT Applications

There are a lot of Silicon Labs SI5350A-B04466-GT Clock Generators applications.

• Test and instrumentation equipment
• Skew suppression
• FM demodulation networks for FM operations
• 10 Gigabit Ethernet
• Aerospace and defense
• High-frequency induction heating
• CPUs
• Test equipment
• Cable television converter boxes
• Electronic countermeasures