SI5350A-B04499-GTR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, there is an embedded clock generator. It contains 10 terminations that can be found in frequency synthesizer. A voltage of 1.8V should be applied to this electronic frequency generator. The Surface Mount allows the electrical component to be installed conveniently on the panel. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. This frequency synthesizer requires a supply voltage above 1.71V to be safe. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. With this clock-generating device, a high-quality clock output frequency of 200MHz can be produced. This frequency generator may fail to start up if the ambient temp is lower than -40°C. This frequency synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY to produce better clock signals.

SI5350A-B04499-GTR Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04499-GTR Applications

There are a lot of Silicon Labs SI5350A-B04499-GTR Clock Generators applications.

• Telecommunication systems
• Wireless base station for LTE, LTE-advanced
• 10 Gigabit Ethernet
• VSAT (Small Ground Satellite Station)
• Myriad digital applications
• Broadcast communication
• Media broadcast servers
• Coherent carrier tracking
• Automatic control system test
• Signal frequency synthesis circuits