SI5350A-B04817-GT Overview

Clock ICs are packaged using the Tube method. 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) contains this Clock PLL. 10 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 1.8V. With the Surface Mount, it is easy to install this electric component on the panel. This clock generator would require a maximum supply voltage of 1.89V. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. The supply voltage for this frequency synthesizer should be kept above 1.71V for safety considerations. Whenever the operating temperature for the PLL exceeds 85°C, it may become ha85°Cardous. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. This frequency generator may fail to start up if the ambient temp is lower than -40°C. There is a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature on this frequency generator in order to produce a better clock signal.

SI5350A-B04817-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04817-GT Applications

There are a lot of Silicon Labs SI5350A-B04817-GT Clock Generators applications.

• Cell phones
• Bit synchronization
• Small signal recovery
• Mechanical devices
• Signal modulation and demodulation
• Cable television converter boxes
• Radio receivers
• Televisions
• Remote telemetry and instrumentation
• Space communucation