SI5350A-B04825-GT Overview

As a clock IC, it uses the Tube package. 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) contains this Clock PLL. As a result, frequency synthesizers can be found to contain 10 terminations. For this clock generator ic, a voltage of 1.8V is required. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 1.89V of power. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. The clock PLL can synthesi200MHze a clock frequency of 200MHz with high quality. Temperatures below -40°C could result in this clock PLL failing to start up. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5350A-B04825-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04825-GT Applications

There are a lot of Silicon Labs
SI5350A-B04825-GT Clock Generators applications.

• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel
• PCI express cards
• Infotainment systems
• Medical equipment
• Multi-function printers