SI5350A-B05598-GTR Overview

Tape & Reel (TR)-method packaging is used for clock ICs. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains this clock generator. There are a total of 10 terminations in this file. The clock generator ic should be grounded with a voltage of 1.8V. Surface Mount-slots make it easy to mount this electronic component on panels. It would take a maximum supply voltage of 1.89V to operate this time clock generator. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. The supply voltage for this frequency synthesizer should be kept above 1.71V for safety considerations. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. In this clock-generating clock generator ic, a frequency of 200MHz is synthesi200MHzed for high-quality output. This frequency generator may fail to start up if the ambient temp is lower than -40°C. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.

SI5350A-B05598-GTR Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B05598-GTR Applications

There are a lot of Silicon Labs SI5350A-B05598-GTR Clock Generators applications.

• MRI
• Antenna automatic tracking
• Digital logic circuits
• Walkie-talkies
• Picocells, femtocells and small cells
• Various decoding circuits
• Ports
• High-speed optical transport network (OTN)
• Digital circuits
• Broadcast communication