SI5350A-B05783-GTR Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, this clock generator is embedded. 10 terminations can be found in frequency generators. This clock generator ic should receive a voltage of 1.8V. With the Surface Mount, it is easy to install this electric component on the panel. It would be possible to supply this clock PLL with 1.89V of power. CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/peripheral ICs are incorporated in this digital clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. The PLL may become ha85°Cardous once the operating temperature exceeds 85°C. Clock PLL synthesi200MHzes a high-quality 200MHz clock output frequency. A temperature of less than -40°C may cause this clock PLL to fail to start. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5350A-B05783-GTR Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B05783-GTR Applications

There are a lot of Silicon Labs SI5350A-B05783-GTR Clock Generators applications.

• Modems
• Frequency synthesis
• Frequency synthesis
• HDD recorders
• Notebooks
• Clock synchronization
• Ultrasound diagnosis
• PMR (Professional Mobile Radio)
• Infotainment systems
• Signal demodulation