SI5350A-B05799-GT Overview

Clock generator is packaged in the way of Tube. Clock PLL is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are a total of 10 terminations in this file. Clock generator ics require a voltage of 1.8V. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage this clock generator would take is 1.89V. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. A frequency generator that runs over 85°C may cause ha85°Cards. A clock generating device that produces high-quality clock output frequencies of 200MHz is available for sale. This frequency generator may fail to start up if the ambient temp is lower than -40°C. This frequency synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY to produce better clock signals.

SI5350A-B05799-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B05799-GT Applications

There are a lot of Silicon Labs SI5350A-B05799-GT Clock Generators applications.

• Set-top boxes
• Multiplexing communication
• Modems
• VSAT (Small Ground Satellite Station)
• Microwave backhaul IF
• Integrated phase noise in aerospace systems
• Local oscillators (LOs)
• Electronic equipment
• CB radios
• Ports