SI5350A-B06870-GMR Overview

As a clock IC, it is packaged by the Tape & Reel (TR) method. Clock PLL is embedded in the 20-VFQFN Exposed Pad package. 20 terminations can be found in frequency generators. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. Surface Mount-slots make it easy to mount this electronic component on panels. Clock PLL is capable of receiving a maximum of 1.89V as a supply voltage. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. In this clock-generating clock generator ic, a frequency of 200MHz is synthesi200MHzed for high-quality output. The operating temperature should be kept above -40°C. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5350A-B06870-GMR Features

Available in the 20-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B06870-GMR Applications

There are a lot of Silicon Labs SI5350A-B06870-GMR Clock Generators applications.

• Various decoding circuits
• Test and instrumentation equipment
• Frequency shifting decodes
• Symbol synchronization
• Mechanical devices
• Clock recovery
• Media broadcast servers
• Test equipment
• VSAT (Small Ground Satellite Station)
• Microwave backhaul IF