It is packaged using the Tape & Reel (TR) method since it is a clock IC. This clock generator is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are 10 terminations found in this file. This time clock generator should be voltaged at 1.8V. PLL clock is mounted in the way of Surface Mount. The maximal supply voltage this clock generator would take is 1.89V. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. This clock-generating clock generator ic is able to synthesi200MHze high-quality clock output frequency of 200MHz. This frequency generator may fail to start up if the ambient temp is lower than -40°C. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5350A-B06876-GTR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Supply voltage of 1.8V Output clock frequency (Max) of 200MHz
SI5350A-B06876-GTR Applications
There are a lot of Silicon Labs SI5350A-B06876-GTR Clock Generators applications.