SI5350A-B07086-GMR Overview

A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. The 20-VFQFN Exposed Pad package embeds this Clock PLL. 20 terminations can be found in frequency generators. For this clock generator ic, a voltage of 1.8V is required. The Surface Mount allows this electrical component to be easily installed on the panel. Clock generators can take up to 1.89V of power as a maximum supply voltageThe number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. Whenever the operating temperature for the PLL exceeds 85°C, it may become ha85°Cardous. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. The operating temperature should be kept above -40°C. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5350A-B07086-GMR Features

Available in the 20-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B07086-GMR Applications

There are a lot of Silicon Labs SI5350A-B07086-GMR Clock Generators applications.

• Instrument
• Carrier synchronization in wired communication
• FPGA and processor clocks
• Clock synchronization
• Smartphones
• CPUs
• Antenna automatic tracking
• Radio receivers
• DVD add-on cards for multimedia PCs
• Microwave backhaul IF