SI5350A-B07147-GMR Overview

In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 20-VFQFN Exposed Pad package includes this clock generator. 20 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 1.8V. PLL clock is mounted in the way of Surface Mount. It would take a maximum supply voltage of 1.89V to operate this time clock generator. CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/peripheral ICs are incorporated in this digital clock generator. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the frequency generator may not start. This frequency synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY to produce better clock signals.

SI5350A-B07147-GMR Features

Available in the 20-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B07147-GMR Applications

There are a lot of Silicon Labs SI5350A-B07147-GMR Clock Generators applications.

• Signal frequency synthesis circuits
• Frequency synthesis
• Bit synchronization
• Test and instrumentation equipment
• Signal modulation and demodulation
• VSAT (Small Ground Satellite Station)
• Clock synchronization
• Microprocessor clock multipliers
• Cable television converter boxes
• Melting