SI5350A-B07177-GT Overview

As a clock IC, it is packaged by the Tube method. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. As you can see, it consists of 10 terminations. Basically, this time clock generator needs a voltage of 1.8V. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 1.89V. Incorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. A clock generating device that produces high-quality clock output frequencies of 200MHz is available for sale. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.

SI5350A-B07177-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B07177-GT Applications

There are a lot of Silicon Labs
SI5350A-B07177-GT Clock Generators applications.

• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel
• PCI express cards
• Infotainment systems
• Medical equipment