SI5350A-B07786-GT Overview

The Tube method is used for packaging clock ICs. As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, this clock generator is embedded. 10 terminations can be found in frequency synthesizer. A voltage of 1.8V should be applied to this electronic frequency generator. The Surface Mount allows this electrical component to be easily installed on the panel. Clock generators can take up to 1.89V of power as a maximum supply voltageThe number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. An ambient temperature below -40°C may cause this frequency generator to malfunction. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.

SI5350A-B07786-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B07786-GT Applications

There are a lot of Silicon Labs SI5350A-B07786-GT Clock Generators applications.

• Radio receivers
• Motor speed controls
• Signal generator
• Space communucation
• DVD recorders
• Test and instrumentation equipment
• Clock recovery
• 10 Gigabit Ethernet
• Cell phones
• Wi-Fi routers