SI5374B-A-GL Overview

Tray-method packaging is used for clock ICs. Clock PLL is embedded in the 80-LBGA package. As you can see, it consists of 80 terminations. For this clock generator ic, a voltage of 1.8V is required. There is a Clock PLL called Clock which is designed to be the input to this clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock generators should operate with the voltage supply of 1.71V~2.75V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. The frequency synthesizer in this product is compatible with all levels of CML, LVCMOS, LVDS, LVPECL logic. This electronic component can be classified into Clock Generator, Jitter Attenuator. Clock PLL is equipped with 80 pin count. The related electronic parts of part number SI5374 are listed below. There are a number of 80 pins that are available on the frequency synthesizers. CAN ALSO OPERATE AT 2.5V SUPPLY is included in this frequency generator to enhance clock signal output. There is an electronic part in this series that belongs to the DSPLL? family. Clock PLL is configured with 8 output. At a frequency of 808MHz, the system can achieve high efficiency.

SI5374B-A-GL Features

Available in the 80-LBGA
Supply voltage of 1.8V

SI5374B-A-GL Applications

There are a lot of Silicon Labs SI5374B-A-GL Clock Generators applications.

• Wireless base station for LTE, LTE-advanced
• Simple clock clean-up circuits
• FPGA and processor clocks
• Cellular/4G
• PCI express cards
• Local oscillator source in receiver
• DVD add-on cards for multimedia PCs
• Pagers
• Signal frequency synthesis circuits
• Remote telemetry and instrumentation