SL2304NZZC-1 Overview

The clock divider is packaged in a 8-TSSOP (0.173, 4.40mm Width) case. There is a Tube packaged with it. It is normal to operate with a value of 140MHz. It has 8 terminations. With a supply voltage of 3.3V, high efficiency is possible. If this is the case, it will be mounted as Surface Mount. Electronic parts classified as Fanout Buffer (Distribution) are considered to be safety components. If you wish to ensure reliable performance, you should set the temperature to 0°C~70°C. The clock switch should be able to be powered by a 2.97V~3.63V V source. On this board, there is a pin count of 8. As a result, the output is LVCMOS. In order for the timeing clock to operate, it is connected to the 8 pins. The structure belongs to the SL2304 family of structures. The maximum supply voltage (Vsup) has been set to 3.63V. A voltage higher than 2.97V is necessary for normal operation of the system. Default settings are set to output 4. Keeping the supply voltage at 3.3V is the key to maximizing the efficiency of the system. The clock divider consumes 18mA quiescent current, and it is unaffected by external factors.

SL2304NZZC-1 Features

8 terminations
The operating temperature of 0°C~70°C degrees

SL2304NZZC-1 Applications

There are a lot of Silicon Labs SL2304NZZC-1 Clock Buffers & Drivers applications.

• Measurement test
• DDR4 JEDEC standard RDIMM design
• Consumer Electronics
• 5G
• DDR4 JEDEC standard LRDIMM design
• Threshold detection
• Gigabit Ethernet (GbE)
• Clock signal format conversion
• Network attached storage
• High-performance workstation