SL2304NZZC-1T Overview

As far as the case type is concerned, the cut smart buffer is available in 8-TSSOP (0.173, 4.40mm Width). Tape & Reel (TR) is the form in which it is packaged. As a rule, the maximum value for normal operation is 140MHz. A total of 8 terminations can be found in it. Supply voltages of 3.3V enable high efficiency. The mount is made up of Surface Mount. This electronic component falls under the classification of Fanout Buffer (Distribution). Setting the temperature to 0°C~70°C will ensure reliable performance. It should be capable of operating with a power supply of 2.97V~3.63V volts. The pin count is 8. The output of it is LVCMOS. This IC divider operates on 8 pins. The SL2304 family contains it. A maximum supply voltage (Vsup) is set to 3.63V. As a rule, the supply voltage (Vsup) should be kept above 2.97V for normal operation. By default, output 4 is set. The supply voltage should be kept at 3.3V in order to obtain maximum efficiency. There is no external influence on it, as it consumes 18mA quiescent current.

SL2304NZZC-1T Features

8 terminations
The operating temperature of 0°C~70°C degrees

SL2304NZZC-1T Applications

There are a lot of Silicon Labs SL2304NZZC-1T Clock Buffers & Drivers applications.

• High-performance server
• Zero crossing detector
• Line receiver and signal recovery
• High speed industry
• Switch
• Big data
• Data center
• Tower server
• FPGA
• Gigabit Ethernet (GbE)