SL23EP04SC-1 Overview

As a clock IC, it uses the Tube package. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. The peak reflow temperature (Cel) amounts to NOT SPECIFIED to be essentially indestructible. As you can see, it consists of 8 terminations. To operate this time clock generator, 2.5V voltage should be applied. Clock is designed as this clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 220MHz is available. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL is capable of receiving a maximum of 2.75V as a supply voltage. Keeping the supply voltage for this frequency synthesizer above 2.25V is recommended for safety reasons. There are 2.97V~3.63V available for use with this clock PLL. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. Microprocessor-specific clock PLL with 8 bits. According to the base part number SL23EP04, its related parts can be found. It is possible to connect to the PLL via 8 pins. A frequency synthesizer with ALSO OPERATES WITH 3.3V SUPPLY features better clock signal output. As a result of this digital clock generator, there is a low timing skew at 0.25 ns max.

SL23EP04SC-1 Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP04SC-1 Applications

There are a lot of Silicon Labs SL23EP04SC-1 Clock Generators applications.

• Remote telemetry and instrumentation
• Frequency shifting decodes
• Skew suppression
• Myriad digital applications
• FMCW Radar
• Automatic control
• Jitter reduction
• HDD recorders
• Digital logic circuits
• Radiotelephones