TSM933CSA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type CMOS, Push-Pull, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.It's a typical with Voltage Reference comparator.This element consists of 2 elements in total.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .8 pins are present on the comparator.You may wish to search TSM933 for more solutions that address your specific needs.The comparator presents a quiescent current of 4.5μA volts.The PCB or other board can be mounted using the Surface Mount on it.Temperatures above 70°C are not recommended.A temperature lower than 0°C is unsuitable for the device.A comparator is designed to operate at a maximum supply voltage of 11V .The comparator is capable of operating at a minimum supply voltage of 2.5V .Comparator electronics comes from the series of TSM93x comparator parts.
TSM933CSA+T Features
CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 4.5μA
TSM933CSA+T Applications
There are a lot of Silicon Labs
TSM933CSA+T linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
