ISP1102BSTM Overview

Designed for common LEDs, this driver IC features an enhanced 14-VFQFN Exposed Pad package.There is a Cut Tape (CT) package for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 4V~5.5V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.With a voltage range of 1.8V, this driver IC can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.A package consisting of 14 market standard pinouts is provided with this integrated circuit.An enhanced power dissipation control is provided by this 14-pin driver IC.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.Using this ic receiver, you were able to achieve a resolution of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.There are 1 transceivers in total that this module isolated transceiver implements.85°C is the minimum operating transceiver module's temperature.This optical transceiver must be able to operate at a minimum of -40°C degrees Celsius during normal operation.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 8mA.

ISP1102BSTM Features

Cut Tape (CT) package
14 pin count
14 pins

ISP1102BSTM Applications

There are a lot of ST-Ericsson Inc ISP1102BSTM Drivers/Receivers/Transceivers applications.

• Wireless teaching
• Wireless communication
• Servers
• Aircraft positioning
• Radio transmission
• Routers
• Clock radio
• Cable network front end
• SONET/SDH Network
• Wireless security systems