E-TDA7391PDTR Overview

In the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package, it is embedded.In this case, it is packaged as Tape & Reel (TR) .In addition, there are 20 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, 1-Channel (Mono) is used as the output.This electrical device is classified as type Class AB .As part of a signal interface in a computer or other communication device, there are 20 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Surface Mount .There is 8V~18V voltage supply to this electrical device.1 channels are available on the device.Operating with Depop, Differential Inputs, Mute, Short-Circuit and Thermal Protection, Standby is possible.Temperatures should not exceed -40°C~150°C TJ .There are 20 pins on this device.Amp parts belongs to the TDA7391 family.In this case, the electronic part is mounted in the way of Surface Mount .According to the manufacturer, the maximum output power of this electronic component is 40W kWh per hour.A normal operation requires a supply voltage (Vsup) above 8V .In this case, the maximum supply voltage (Vsup) reaches 18V .Amp parts is a Single supply type.Power is supplied by a 14.4V volt source.Amp parts is a member of the Automotive series of electronic parts.Supply currents are limited to 150mA .

E-TDA7391PDTR Features

20-SOIC (0.433, 11.00mm Width) Exposed Pad package
20 pin count
TDA7391 family
40W kWh per hour
Automotive series

E-TDA7391PDTR Applications

There are a lot of STMicroelectronics
E-TDA7391PDTR audio amplifiers applications.

• single/dual op amp sum and difference circuits
• Integrator and differentiator circuits
• Logarithmic and exponential operation circuits
• Multiplication and division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering