HCF4051BEY Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -55°C~125°C TA. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. If you are looking for variants of the digital switch, trying search with HCF4051. This digital multiplexer has 280Ohm internal resistance. Datasheets for functions of 16 pins are available. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 20V. An effective Dual supply digital multiplexer. It is recommended to use 3V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 80nA. A voltage of 3V~20V is required for this switch device, which drains from a single voltage source. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A 8 input needs to be operated. There are various bandwidths available for data transfer. Resistivity from Drain to Source is 125Ohm for this electronic part.

HCF4051BEY Features

8 Channels
80nA Supply Current
Bandwidth: 60MHz
Drain-to-Source resistance: 125Ohm

HCF4051BEY Applications

There are a lot of STMicroelectronics HCF4051BEY Analog Switches & Multiplexers ICs applications.

• Fault Tolerant Systems
• Switching Systems
• Industrial
• Communications systems
• SONET/SDH ADM
• New designs requiring multiplexer functions
• T1/E1 Terminals
• ISDN NT1/TA
• Intelligent PBX
• Imaging