Welcome to Hotenda.com Online Store!

logo
userjoin
Home

L6206N

L6206N

L6206N

STMicroelectronics

Tube 24-PowerDIP (0.300, 7.62mm) Logic 8V~52V Through Hole -25°C~125°C TJ DC Motors, Stepper Motors, Voltage Regulators Half Bridge (4) Inductive 8V~52V

SOT-23

L6206N Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Through Hole
Mounting Type Through Hole
Package / Case 24-PowerDIP (0.300, 7.62mm)
Number of Pins 24
Operating Temperature -25°C~125°C TJ
Packaging Tube
JESD-609 Code e3
Feature Bootstrap Circuit
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Resistance 300mOhm
Terminal Finish Matte Tin (Sn) - annealed
Applications DC Motors, Stepper Motors, Voltage Regulators
Voltage - Supply 8V~52V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 48V
Base Part Number L6206
Pin Count 24
Number of Outputs 4
Output Voltage 52V
Max Output Current 5.6A
Operating Supply Voltage 48V
Supply Voltage-Min (Vsup) 8V
Number of Channels 2
Interface Logic
Analog IC - Other Type STEPPER MOTOR CONTROLLER
Nominal Supply Current 10mA
Output Configuration Half Bridge (4)
Output Current 2.8A
Output Current per Channel 2.8A
Rise Time 250ns
Collector Emitter Voltage (VCEO) 52V
Max Collector Current 2.8A
Release Time 550 ns
Voltage - Load 8V~52V
Fault Protection Current Limiting, Over Temperature, UVLO
Rds On (Typ) 300m Ω
Motor Type Brushed
Current - Peak Output 5.6A
Load Type Inductive
Height 3.3mm
Length 31.75mm
Width 6.6mm
REACH SVHC No SVHC
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $6.03000 $6.03
15 $5.41667 $81.25005
105 $4.43819 $466.00995
510 $3.77816 $1926.8616
L6206N Product Details

L6206N Overview


In order to package H bridge, Tube is used.H bridge is included in the 24-PowerDIP (0.300, 7.62mm) package as a cost-saving measure.Based on the supply voltage of 8V~52V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Through Hole.Motor driver H bridge is possible for -25°C~125°C TJ to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including DC Motors, Stepper Motors, Voltage Regulators.On the PCB H gate is mounted using Through Hole.Full bridge also has a number of specific characteristics, including Bootstrap Circuit.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 24 terminations are employed.Signal interfaces include 24 pins that serve as pronged contacts.The base H bridge ic number of L6206 allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 48V is required.H bridge circuit contains an analog IC type STEPPER MOTOR CONTROLLER.During a specified ambient temperature, the power supply can supply the maximum load current 5.6A.A maximum current is reached by output when H-bridge reaches 5.6A.The power supply pins and the output pins are conducting a current of 2.8A.It is through the 24 pins that the bridge driver can perform its specific functions.The output of this Hbridge is 4.The operating supply voltage is maintained at 48V in order to ensure high efficiency.Hbridge 52V releases voltage.

L6206N Features


Available in 24-PowerDIP (0.300, 7.62mm) Package / Case
Operating Temperature at the range of Through Hole
Interface IC Type : L6206
Subcategory: 5.6A
Number of Receivers: 48V


L6206N Applications


There are a lot of STMicroelectronics
L6206N Full Bridge Drivers, Half-Bridge Drivers applications.


  • Desktop Computers
  • V-Core
  • Non-V-Core
  • Workstations
  • High-Current DC-DC Point-of-Load Converters
  • Networking Microprocessor Voltage Regulators
  • Telecom Microprocessor
  • Voltage Regulators
  • Small Form-Factor Voltage Regulator Modules
  • Notebook Computers

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News