LS404CN Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. In total, the buffer amplifier consists of 14 pins. Op amp rates 5mV as input offset voltage. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. This op amp can operate from a supply current at 1.5mA. There should be no change in the voltage gain. This op amp contains 4 circuits. There are a total of 2 channels available on the op amps. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. Use op amps only at temperatures no higher than 70°C. This linear amplifier has a total of 4 elements. The operating supply voltage of the buffer op amp is rated at 15V. A supply of 1.5mA or higher is recommended for use with this electronic part. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. The linear amplifier's supply voltage should be higher than 6V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts. A linear amplifier such as this has 4 amplifiers on it.
LS404CN Features
100dB voltage gain
LS404CN Applications
There are a lot of STMicroelectronics LS404CN Instrumentational OP Amps applications.
- Automotive sensors
- Power generator
- Semiconductor detectors
- PDA
- Laptop
- Tablets
- Television broadcasting equipment
- High gain DC amplifier
- Image computer boards
- Gaming industry
