M27C256B-12C1 Overview

There is a Non-Volatile memory type associated with this device. There is a Tube case available. In the case of 32-LCC (J-Lead), it is embedded within the case. The chip has an 256Kb 32K x 8 memory. There is a EPROM-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of 0°C~70°C TA, this device allows it to be used in a variety of demanding applications. It is supplied votage within 4.5V~5.5V. It is recommended that the mounting type be Surface Mount. As you can see from the diagram, the chip is planted with 32 terminations. In total, 1 functions are supported by this part. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. When choosing similar parts, M27C256 is frequently referred to as the device's base part number. The memory device has an 32-pin package, which encloses it in a small package. A memory device with 32 pins means that it contains 32 memory locations, indicating that it has 32 pins. The operating supply voltage of this memory chip is noted to be 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. This memory chip is rated 50mA for its nominal supply current. As for power supplies, this memory chip requires just 5V . This device has COMMON-bit memory mapped I/O port addresses. OTP ROMs-types are usually considered to be this component. As a result of the frequency of this memory chip, data can be processed at a rate of 120GHz. A supply current of 30mA is suggested for the device.

M27C256B-12C1 Features

Package / Case: 32-LCC (J-Lead)
32 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
Freguency at 120GHz
120GHz terminals

M27C256B-12C1 Applications

There are a lot of STMicroelectronics M27C256B-12C1 Memory applications.

• graphics card
• cell phones
• Camcorders
• workstations,
• eSRAM
• mainframes
• hard disk drive (HDD)
• networking
• main computer memory
• data buffer