M27C512-90C1 Overview

A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tube case as well. There is a 32-LCC (J-Lead) case embedded in it. A memory chip with a capacity of 512Kb 64K x 8 is used on this device. As with most mainstream devices, this one uses EPROM-format memory. Featuring an extended operating temperature range of 0°C~70°C TA, this device allows it to be used in a variety of demanding applications. A voltage of 4.5V~5.5V can be supplied to memory ics. The recommended mounting type for this device is Surface Mount. There are 32 terminations on the chip. As many as 1 functions are supported for comprehensive working. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. Similar parts are frequently selected using M27C512, the device's base part number. The memory device has an 32-pin package, which encloses it in a small package. The memory device has a total of 32 pins, thus indicating that it has a total of 32 memory locations. A voltage of 5V is noted as the operating supply voltage for this memory. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. This memory chip is rated 50mA for its nominal supply current. There is only a single power supply required for this memory chip. I/O port addresses in this device are mapped to COMMON bits from the device's memory. The component is usually referred to as a type of OTP ROMs. The device is suggested to operate a supply current of 50mA.

M27C512-90C1 Features

Package / Case: 32-LCC (J-Lead)
32 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

M27C512-90C1 Applications

There are a lot of STMicroelectronics M27C512-90C1 Memory applications.

• networks
• personal digital assistants
• eDRAM
• main computer memory
• DVD disk buffer
• workstations,
• personal computers
• eSRAM
• mainframes
• networking