M74HC4051B1R Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Through Hole. Multiplexer and demultiplexer circuits have a number 8:1. Operational temperature extended around -55°C~125°C TA. Totally, there are 16 terminations. A 8 channel electronic part produces high-quality output. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. It consists of 1 circuits. Try searching with M74HC405 to find analog multiplexer variants. Analog switches have 100Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. The analog switch ic is of the Dual supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 8μA current would suffice. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. You should attach at least 1V voltage if you are using dual power supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. A 8 input needs to be operated. 120MHz bandwidths enable data to be transferred. A Drain to Source resistance of 50Ohm is shown for this electronic part.

M74HC4051B1R Features

8 Channels
8μA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 120MHz
Drain-to-Source resistance: 50Ohm

M74HC4051B1R Applications

There are a lot of STMicroelectronics M74HC4051B1R Analog Switches & Multiplexers ICs applications.

• Fiber to the Home
• Imaging
• FTTH
• Industrial
• Audio/video switches
• E1 Multiplexer
• Intelligent PBX
• Fiber In The Loop (FITL)
• Digital access cross connects
• Cable Modem