M74HC4066TTR Overview

Shipping overseas is convenient due to the electrical component's packing in 14-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -55°C~125°C TA. 14 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 14 pins. Multiplexers built on a SPST - NO switching circuit are built. Try searching for the analog switch ic with M74HC406 if you are looking for variants. As far as internal resistance is concerned, it has 80Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 12V voltage to the switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 2V. This digital switch can be operated with a current of 8μA. This analogue multiplexer requires a voltage of 2V~12V when it drains from a single voltage supply. Put voltage above 8μA on the multiplexer to cause damage. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The 4 inputs need to be operated in order to work.

M74HC4066TTR Features

1 Channels
Switch Circuit: SPST - NO
8μA Supply Current
-3db Bandwidth: 200MHz

M74HC4066TTR Applications

There are a lot of STMicroelectronics
M74HC4066TTR Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions