M74HC595B1R Overview

The device is embedded in 16-DIP (0.300, 7.62mm) package. Chip terminations add up to 16. This item is packed in case Tube. The part operates at 4.5V voltage. On this part, there are 1 elements. It is equipped with a pin count of 16. Through Hole is recommended for mounting. In the HC/UH series, the electronic component belongs. Through Hole is the way in which this component is mounted. -55°C~125°C is the operating temperature range. Voltages within 2V~6V are supplied to the device. The 74HC series represents this electrical component. Based on the M74HC59 family, you can search for similar parts. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. This part should have a minimum supply voltage (Vsup) of at least 2V. A voltage of 2/6V can be delivered by it. In this part, the maximum supply voltage (Vsup) should not exceed 6V. There are 8 bits on the IC chip. Operation is available on only 3 output lines. As a result, it runs at a quiescent current of 4μA. There are 8 circuits in this device.

M74HC595B1R Features

With 16 pins
Mounted in Through Hole type.
Based on M74HC59 family
It supplies 2/6V power
With 3 output lines
Quiescent Current at 4μA

M74HC595B1R Applications

There are a lot of STMicroelectronics M74HC595B1R Shift Registers applications.

• 7-segment display control
• Serial to parallel converter
• Data manipulation
• Output expansion
• ROM Chips
• Serial-to-parallel data conversion
• Serial-to-parallel data conversion
• Dual-rank shift, hold, and bus applications
• LED matrix control
• Remote control holding register