ST890BD Overview

As you can see, it's packaged in the way of a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.Voltage output is P-Channel volts at maximum.The ST890 family contains this object.As a result, there are 8 terminations.The 8 pins are used for the operation of the system.It contains 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 3V.It is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.It has a resistance of 90mOhm.It is set to 1.2A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part has a power supply of 3/5V volts.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.There is a minimum input voltage of 2.7V volts.It requires a maximum current requirement of 13mA.

ST890BD Features

Supplied from 3V
Resistance of 90mOhm

ST890BD Applications

There are a lot of STMicroelectronics ST890BD Power Switches ICs applications.

• PDAs
• Wearable Devices
• USB Protection
• Portable GPS Device
• PC Cards
• Handheld Devices
• Hot Swaps
• USB Power Distribution
• Storage (HDDs, SSDs)
• Set-Top Boxes